Safe Mould Treatment & Removal in Singapore — From S$199
Mould is a moisture problem first. Treat the source, not just the stain.
Assessment-led mould treatment for Singapore homes using low-odour actives, contained work and capture-first removal, from S$199 depending on scope.
Mould returns when the moisture behind it is never found. Our specialist team assesses affected areas, maps the moisture source, contains the work zone, treats affected surfaces with low-odour actives suitable for occupied homes, and captures rather than redistributes what is removed. You then receive drying, ventilation and prevention guidance. Scope and final quotation are confirmed on assessment through our mould specialist division.
Not sure when this service is due? Aira Sense reads your environment and times the visit for you.
The everyday outcome: a more comfortable environment for the people who live in it.
When to have it looked at
Mould is a moisture problem wearing a stain.
In Singapore humidity, growth starts wherever a surface stays damp longer than it dries. Cleaning the mark without finding the water only resets the clock.
Treatment
From S$199
Scope confirmed on assessment · inspections from S$299.
01
Visible growth
Black, green or grey speckling on walls, ceiling corners, wardrobe backs, skirting or window reveals.
02
Musty smell
A closed-cupboard or damp-cloth odour that returns after cleaning usually means growth you cannot see yet.
03
Recurring dampness
Cool spots, condensation on walls, peeling paint or bubbling plaster in the same place each year.
04
Water history
A past leak, roof or bathroom seepage, aircon condensation or a wall shared with a wet area.
Assessment before treatment
Find the water. Contain the work. Capture what comes off.
Assessment
Moisture mapping first.
Readings across the affected wall and its surroundings show how far dampness extends and where it is likely entering. That decides the treatment scope rather than the size of the visible mark.
Treatment
Low-odour and contained.
Products are selected for use in occupied homes, applied inside a protected zone with ventilation and airflow managed, so removed material is captured instead of carried into the rest of the home.
How a visit runs
Six steps from photo to prevention.
Step 1
Send photos to Aira
Show the affected area, the surrounding wall and anything you know about past leaks.
Step 2
Assessment on site
We inspect affected zones, take moisture readings and look for the likely water path.
Step 3
Contain and protect
The work zone is isolated and furnishings, floors and adjacent rooms are protected.
Step 4
Treat and remove
Affected surfaces are treated with low-odour actives, and material is captured rather than brushed loose.
Step 5
Dry and verify
Drying, ventilation and airflow are addressed, and the area is reviewed with you before we finish.
Step 6
Prevent recurrence
You receive moisture, ventilation and follow-up guidance, plus repair advice where the source needs trade work.
Starting prices
Clear starting points, confirmed on assessment.
Essential surface treatment
From S$199
Defined affected area, treated and cleared in one visit. Scope confirmed on assessment.
Toilet or wet-area refresh
From S$199
Treatment of a single bathroom or wet area where growth follows persistent humidity.
Basic inspection
From S$299
Walk-through assessment with moisture readings and a written summary of findings.
Comprehensive inspection
From S$499
Extended assessment including thermal imaging to trace hidden moisture paths.
Prices are starting points for common scopes in Singapore homes. Affected area, access, height, material and the moisture source all affect the final quotation.
Before we arrive
Leave the area as it is.
Clear furniture, boxes and stored items away from the affected wall or cupboard
Do not scrub or bleach the area before assessment — it hides the extent and spreads spores
Tell us about past leaks, renovation work, waterproofing or previous mould treatment
Provide electricity and water access, and let us know about pets, infants or sensitivities in the home
Plan for the treated area to stay unused and ventilated until fully dry
Outside this service
What treatment does not cover.
Waterproofing, plastering, tiling, roofing and plumbing repair — arranged separately as trade work
Structural damage, rotted timber or compromised ceiling boards requiring replacement
Air or surface laboratory testing and certification
Any promise that mould cannot return where the moisture source remains uncorrected
Medical assessment of symptoms — please speak to a doctor about health concerns
Good to know
Honest answers about mould in Singapore homes.
How is safe mould treatment different from using bleach?
Bleach often only removes surface pigment while leaving the root of the mould intact and introducing harsh fumes. Safe treatment uses natural biological actives to address the growth itself and HEPA-filtration to capture spores, supporting a healthier indoor environment without toxic residue.
How much does safe mould treatment cost in Singapore?
Essential surface treatment of a defined area starts from S$199, and a single toilet or wet-area refresh also starts from S$199. Inspections start from S$299, or from S$499 with thermal imaging. Final scope and quotation are confirmed on assessment, since the affected area and access vary by home.
Will the mould come back?
Mould returns wherever moisture returns. Treatment addresses the growth and reduces what the surface carries, but recurrence depends on correcting the water source — a leak, a failed seal, poor ventilation or ongoing condensation. We identify the likely source and tell you what needs trade repair.
Is the treatment safe with children and pets at home?
We select low-odour products intended for use in occupied homes and work within a contained zone with ventilation. We still ask that children and pets stay out of the working area, and that the treated surface stays unused until dry. We do not claim any product is entirely without effect on sensitive individuals.
Can I just bleach it myself?
Bleach often removes the dark pigment while leaving growth in the porous material, and dry scrubbing releases spores into the air. It also masks the extent of the problem before assessment. If you have already tried it, tell us — it changes what we can see.
Which homes do you work in?
HDB flats, condominiums and landed homes across Singapore, including bedrooms, wardrobes, bathrooms, service yards, ceilings and areas around aircon units.
Specialist assessment and quotation
Detailed inspections are handled by our mould division.
Thermal imaging, full inspection reports and remediation scoping are booked through picoxmouldremoval.sg, the Pico X Health specialist site. For a quick photo review and scheduling, message Aira first.
Mould is a structural problem that becomes an environmental health issue.
In Singapore's high humidity, mould is often treated as a surface cleaning task. But mould is biological growth that roots into porous materials and releases spores into the air you breathe. Safe treatment means addressing the growth without introducing harsh toxic chemicals into your living space.
What common practice looks like
Bleaching visible marks without addressing the underlying moisture or the rooting growth.
Using high-VOC anti-mould paints that off-gas for months inside a closed home.
Ignoring the 'musty' smell in cupboards or behind furniture until it becomes a visible bloom.
Scrubbing dry mould, which releases millions of spores directly into the air and across the home.
How it reaches the body over years
Inhaled mould spores and fragments are common triggers for respiratory irritation, congestion and skin sensitivities.
Prolonged exposure to mould-prone environments is a significant drag on indoor air quality and general wellbeing.
Chemical residue from harsh biocides can be as irritating as the mould they are meant to treat.
Left untreated, mould spreads through the air to other rooms, clothing and soft furnishings.
What correct care changes
The likely moisture source is identified before any treatment begins.
Low-odour active treatment selected for use in occupied homes, applied within a contained zone.
Capture-first removal, so what comes off the surface is collected rather than spread through the home.
Drying, ventilation and prevention guidance, because mould can return wherever moisture returns.
Treat mould at its moisture source, not just the stain — from S$199 depending on scope.
We describe comfort, cleanliness and indoor environment quality. Nothing here is medical advice, diagnosis or treatment, and we do not promise health outcomes.
